# DrivAerML Wind Tunnel

How a car's wake forms at 140 km/h: slices of lost energy stack around the body, and smoke traces the swirling air trailing behind it\.

By greenlig

Topic: Engineering

[Open the interactive Jig](https://ask.jig.com/j/BJw2a0iuvNA5)

## Transcript

### 1. Slice through the wake

Air rushes left to right past a car at 38\.9 m/s, about 140 km/h\. Each glowing slice is a cut through the air, 20 cm apart, showing how much energy the air has lost \(total pressure loss\): dark means none, then teal, amber and white\-hot\. The bright outlines stack up into the car itself\.

Data: DrivAerML run 1 \(Ashton et al\. 2024\), licensed CC BY\-SA 4\.0\. CpT, the total pressure coefficient, is 1 for untouched air; loss is 1 \- CpT\.

### 2. Pick a slice

Slide to choose any of the 41 slices\. In front of the car the air hardly notices it\. Behind it trails the wake: slow, swirling air that has lost energy, which the car pays for as drag\.

### 3. Release the smoke

65,536 smoke particles stream from two rakes and ride the measured airflow, slowed about 29 times\. Amber smoke is slow, pale blue moves at the wind speed and cyan is faster\. Switch Turbulence off to see the calm average flow, and back on to add the gusts\.

Measured: CpT, the mean flow, and the turbulence strength and direction\. The individual eddies are generated to match those measurements because the data stores averages\. Eddy size \(0\.2 m\), lifetime and drift are modelled\.
