# Spheroidal Weathering in Hong Kong

How rain and chemical weathering along joints turn Hong Kong granite blocks into rounded corestones and hillside boulders\.

By Wai Lam Lau

Topic: Earth &amp; Geography

[Open the interactive Jig](https://ask.jig.com/j/FPHVEQ2MjLGY)

## Transcript

### 1. Boulders on Hong Kong’s hills

Many Hong Kong hillsides are dotted with big, rounded granite boulders\. Rivers did not roll them smooth\. They were shaped underground, in place, by chemical weathering: rock breaking down where it sits\. This model is a slice through one granite hillside\.

Drag to turn the model and look at its sides\. Each side is a cut face showing the rock inside\.

### 2. Joints: cracks in fresh granite

Deep down, granite starts hard and fresh\. Joints are natural cracks that split the rock into rough, box\-shaped blocks\. They formed as the rock cooled and as the rock above it was worn away\. Joints are lines of weakness, and everything that follows starts there\.

The model is shrunk: real joint blocks are far bigger than these, often taller than a person\.

### 3. Rainwater seeps down the joints

Hong Kong has a hot, humid climate and heavy summer rain, about 2,400 mm a year\. Rainwater picks up carbon dioxide from the air and soil, so it becomes a weak acid\. It soaks down through the joints and reaches deep into the rock\.

Heat and plenty of water both speed up chemical weathering\.

### 4. Hydrolysis turns feldspar into clay

Look closely at the edge of a block\. Water reacts with the pink and white feldspar crystals and turns them into soft kaolin clay\. This reaction is called hydrolysis\. Quartz grains hardly react, so they stay behind as gritty sand\.

Rusty colours come from oxidation: iron in dark minerals such as biotite reacts with oxygen\.

### 5. Corners rot first

A corner is attacked by water from three sides, an edge from two and a flat face from only one\. So corners and edges break down fastest, and each box\-shaped block is slowly rounded\. That is why this process is called spheroidal weathering\.

### 6. Corestones in decomposed granite

Rotten rock peels away in thin shells, like the layers of an onion\. What survives is a hard, rounded core called a corestone\. Around it lies soft, crumbly saprolite, which Hong Kong engineers call completely decomposed granite, or CDG\.

Move the slider to run weathering forwards and backwards through the whole slice\.

### 7. The weathering profile

Weathering is strongest near the surface and fades with depth\. At the top, soil and saprolite\. In the middle, corestones in saprolite\. At the bottom, fresh jointed granite\. The glowing line marks the weathering front, where rotten rock meets fresh rock\.

Granite covers about a third of Hong Kong’s land, and its weathered layer, or regolith, can be very thick\.

### 8. Erosion uncovers the boulders

Over thousands of years, surface runoff and small landslides carry away the soft saprolite\. The hard corestones are left behind as boulders on the slope, and stacks of them form tors\. They were shaped underground long before they saw daylight\.

### 9. Why it matters in Hong Kong

Boulders give many Hong Kong hills their rugged look\. But a corestone resting on weak saprolite can loosen after heavy rain\. So engineers inspect slopes for boulder falls and landslides\. Rock structure, climate and time work together to shape the landform\.

HKDSE key words: chemical weathering, hydrolysis, joints, corestone, regolith, differential weathering, mass movement\.
