# Solar to Battery: Chemistry in Motion

Cross\-sections of a silicon solar cell and a lithium\-ion battery joined by a wire: photons, electron\-hole pairs, current and Li\+ ions charging the battery

By nimble\-badger\-c94d28c5

Topic: Energy

[Open the interactive Jig](https://ask.jig.com/j/MVlN8tMf9EsD)

## Transcript

### 1. From sunlight to stored energy

On the left, a silicon solar cell is cut open; on the right, a lithium\-ion battery\. A wire joins them through a charge controller\. Follow light as it becomes moving charge, then chemical energy stored in the battery\.

Drag to orbit and scroll or pinch to zoom\. Click either cross\-section to fly to it\. Layers are drawn thousands of times thicker than real: not to scale\.

### 2. Light arrives through the concentrator

A Fresnel lens gathers sunlight onto the cell, giving it several suns' worth of light\. The deep blue silicon\-nitride coating on top cuts reflection, so more photons enter the silicon\. Thin silver fingers collect current while blocking little light\.

Concentrators are optional\. Most rooftop panels use plain sunlight\.

### 3. Two kinds of silicon meet

The cell is one silicon crystal doped two ways\. Phosphorus atoms \(blue\) give the thin n\-type top spare electrons; boron atoms \(amber\) give the thick p\-type base holes\. Where they meet, carriers cancel and leave fixed \+ and \- ions, so an electric field builds up across the p\-n junction\.

The glowing arrows show the field pointing from n to p\. It pushes electrons up and holes down\.

### 4. Photons make electron\-hole pairs

A photon carrying more than 1\.12 eV lifts an electron out of its bond and leaves a hole behind\. The junction's field sweeps the pair apart: electrons \(cyan, e\-\) drift up to the n\-type layer and fingers, holes \(orange, h\+\) down to the rear contact\.

Press the button for a flash of concentrated sunlight\.

### 5. Current flows through the wire

The separated charges give about 0\.6 V per cell\. Electrons leave the negative terminal on top, travel through the wire and the charge controller, and return to the rear contact\. Only electrons move in the wire; more sunlight means more of them each second\.

A real charger joins many cells in series and uses a controller to reach the battery's 4\.2 V\.

### 6. Charging: Li\+ crosses the electrolyte

The current pushes electrons into the graphite anode\. To balance their charge, lithium ions leave the NMC cathode, cross the liquid electrolyte and pass through the pores of the separator\. The separator lets ions through but keeps the two electrodes from touching\.

The separator is only about 20\-25 micrometres thick\. Electrons never cross it\.

### 7. Energy stored in graphite

Each lithium ion slips between graphene sheets and pairs with an electron from the wire, forming LiC6\. The charge meter fills as ions arrive, until the cell reaches its 4\.2 V limit\. The energy now sits in the chemistry, ready to flow back when the battery powers something\.

Graphite is the negative electrode; it is called the anode during discharge\.
