# How an AI data centre cools its chips

How liquid cooling carries heat from an AI chip through cold plates, manifolds and a CDU to coolers on the roof

By Numa

Topic: Engineering

[Open the interactive Jig](https://ask.jig.com/j/UKKaHodhzBqC)

## Transcript

### 1. One rack, about 120 kW of heat

Flat out, its 72 AI chips need about 120 kW of cooling\. Most of that heat leaves in liquid; fans take the rest\.

### 2. Chip and cold plate

Drag the tray out\. Coolant flows through a copper cold plate on each chip, never touching the chip\.

### 3. Rack manifolds

Manifolds feed every tray through quick disconnects: blue in, orange out\. This is the technology cooling loop\.

### 4. Coolant distribution unit

Its heat exchanger passes the heat to facility water without mixing the two loops\. Twin pumps back each other up\.

About 2\.4 m tall, about 2\.3 MW\.

### 5. Up to the roof

A dry cooler blows air over its coils and uses almost no water\. An evaporative cooler sprays its coil so some water evaporates\.

Warm\-water cooling lets many sites skip chillers\.

### 6. From chip to sky

72 chips, about 120 kW, carried by water from chip to sky\.
