# Subtractive Synthesizer Explainer

A playable flat\-design subtractive synth that explains oscillator, filter, envelope and effects

By Valentin Mermet\-Bouvier

Topic: Art, Music &amp; Film

[Open the interactive Jig](https://ask.jig.com/j/Zg0Y1VlPVdnD)

## Transcript

### 1. Meet the synthesizer

A subtractive synthesizer starts with a bright, buzzing tone and carves it into an instrument\. The sound flows left to right: oscillator, filter, amplifier with its envelope, then effects\. The screen above shows the sound at every stage\.

Classic analog synths like the 1970 Minimoog follow this same path\. Turn any knob, or tap Listen on a module to hear it\.

### 2. Choose an oscillator

The oscillator makes the raw tone by repeating one wave shape at the note's pitch\. A sine holds only the fundamental\. A triangle adds faint odd harmonics, a square strong odd ones, and a sawtooth every harmonic, so it sounds the brightest\.

Watch the harmonics bars: a wave's shape is a recipe of overtones\. Sawtooth is the usual start, because it gives the filter the most to remove\.

### 3. Filter away harmonics

This is where subtractive synthesis gets its name\. A low\-pass filter lets harmonics below the cutoff through and removes those above it, so the tone gets darker while the pitch stays the same\. Resonance boosts a narrow band right at the cutoff\.

The Minimoog's ladder filter cuts 24 dB per octave above the cutoff\. Near full resonance it starts to whistle on its own\.

### 4. Shape it with an envelope

The amplifier sets the loudness, and its envelope moves that loudness every time a key is pressed\. Attack is the rise, Decay the fall to the Sustain level held while the key is down, and Release the fade after you let go\.

Sustain is a level, not a time\. A short attack with low sustain gives a pluck; a slow attack gives a soft pad\.

### 5. Add effects

Effects process the finished voice\. A delay repeats it as fading echoes, and a reverb blurs it into the long tail of a room\. Neither changes the note itself: they place it in a space\.

Turn up Delay to see the echoes repeat in the loudness graph, and Reverb to watch the tail grow\.

### 6. The whole chain

Oscillator for the raw tone, filter for the colour, envelope for the shape in time, effects for the space\. Every synth sound is a set of choices at these four stages\. Turn any knob and tap Listen to try your own\.

Many synths add an LFO, a slow oscillator that wobbles pitch or cutoff, and a second envelope that sweeps the filter on each note\.
