# BRYO Soundscape Headphones Visualizer

Inspect, assemble and configure the BRYO Soundscape TWIN over\-ear headphone

By asjdf;klasjfkl;asjd

Topic: Computing, AI & Electronics

[Open the interactive Jig](https://ask.jig.com/j/q9nCXsGN5zWI)

## Transcript

### 1. BRYO Soundscape TWIN

Closed\-back over\-ear headphone, MY24 twin\-cup build: two 90 mm round cup shells on forked yokes, telescoping steel sliders and a spring\-steel headband\. Drag anywhere to turn the view a full 360° round the product; pinch or scroll to zoom\.

Illustrative digital twin: no manufacturer drawing was available, so dimensions are representative, not measured\.

### 2. Exploded View

Each cup stack separates along its axis: ear pad, driver module, cup shell and the optional walnut cap\. The headband lifts off the sliders and the thumb screws back out of the end blocks\.

Toggle the exploded view to compare the stack with the assembled unit\.

### 3. 1 · Seat the Driver Modules

Insert each driver module into its cup shell, diaphragm facing the ear side, until the baffle ring sits flush on the rim\. Left and right modules are mirror images; match the cup\.

### 4. 2 · Mount the Cups in the Yokes

Slide each cup between the yoke arms and engage both pivot pins on the cup axis\. The cup should swivel freely about the pins with no axial play\.

### 5. 3 · Fit the Ear Pads

Align the pad ring with the cup rim, press it on and turn it clockwise about 20° until it locks\. Pads are a wear part: reverse the turn to remove them for replacement\.

### 6. 4 · Fit the Headband and Set the Size

Lower the headband so both end blocks slide over the steel sliders\. Set the extension per side, then drive each knurled thumb screw clockwise, finger\-tight, to clamp the slider\.

Do not use tools on the thumb screws; finger torque is sufficient to hold the slider\.

### 7. Hero Highlights

Select a feature to frame and highlight it: the replaceable ear pads, the USB\-C receptacle on the right cup, or the size\-adjustment thumb screw\.

### 8. TrimLine Packages

Three TrimLine packages share the same hardware and differ in finish only\. Onyx: matte black shells with gunmetal trim\. Arctic: white shells with satin aluminium\. Sandstone: warm sand shells with champagne trim\.

### 9. Accessories

Two optional accessory variants fit the same cups\. The detachable boom microphone clips to the lower front of the left cup; the walnut caps seat on the outer faces of both cups\.

### 10. Assembly Complete

Check that both pads are locked, both thumb screws are finger\-tight and the cups swivel freely on their pins\. Return to any step to inspect or reconfigure the unit\.