# IKEA \- LACK Side Table

Assemble an IKEA LACK side table step by step, following manual AA\-2544914

By Numa

Topic: Home & DIY

[Open the interactive Jig](https://ask.jig.com/j/vOpN6ldiYdho)

## Guide

### 1. Parts

A table top, four legs, four foot inserts and four double\-ended screws, laid out on a blanket\. No tools are needed: everything is done by hand\. Tap a part to see its name\.

Build on a soft surface such as a rug or blanket so the top does not get scratched\.

### 2. 1 · First Foot Insert

Stand a leg with its chamfered end up: that end has the larger hole\. Press a foot insert into the hole by hand until the disc sits flat on the leg\.

The other end of the leg has square edges and a small hole\. That end takes the screw\.

### 3. 1 · Other Three

Press a foot insert into the chamfered end of each of the other three legs the same way\.

### 4. 2 · First Screw

Lay the table top upside down on the blanket\. Screw a double\-ended screw into one corner hole by hand, turning it clockwise, until half of it stands out\.

### 5. 2 · Other Three Screws

Screw the other three double\-ended screws into the remaining corner holes the same way\.

### 6. 2 · First Leg

Hold a leg with its foot insert up and set its small hole on a screw\. Turn the whole leg clockwise until it sits tight against the table top\.

### 7. 2 · Other Three Legs

Screw the other three legs onto their screws the same way, turning each clockwise until it is tight\.

### 8. 2 · Turn It Over

Lift the table, turn it over and stand it on its feet\. Your LACK side table is ready\.

This is a light table: do not sit or stand on it, and keep the load on top under 10 kg\.